ENERGY · SOLAR
Specialist Safety Officers For Utility-Scale Solar Construction
Solar-specialist safety officers, ready on site in 48 hours and confirmed in writing, for PV farm builds across Ireland, the UK, and Europe. We bring proven experience from our wind and electrical utilities work to every solar project.
Industries we serve
utility-scale solar construction
Where we deploy on a solar build
Run A Solar Build Without A Working-At-Heights Incident
We focus on the three phases of a utility-scale solar build where safety officer presence and project-specific documentation prevent the incidents that delay grid energisation.
Balance Of System install supervision
We put industry-specific safety officers on the ground for pile driving, mounting structure erection, PV module install, and DC cable pull. They run daily walkdowns, toolbox talks, and live RAMS updates as the build front advances.
- MEWP operator supervision across long install fronts
- Working-at-heights compliance at mounting height
- Sub-contractor competency verification at gate
PV interconnection and inverter substation commissioning
Live HV interconnection at grid tie-in carries the same statutory framework we run every day on utilities and electric projects. We sit alongside the principal contractor through inverter set-down, transformer commissioning, and first energisation.
- Isolation procedures at grid tie-in
- Live HV switching protocol supervision
- Lift Plan authoring for substation set-down
Project-specific RAMS, Lift Plans, and Permits-to-Work
Every document is authored to your specific site, build sequence, and sub-contractor mix. Nothing is pulled from a template library. Our chartered advisor signs off the file before it goes near a regulator inspection.
- RAMS keyed to the PV mounting structure on your site
- Lift Plans authored under General Application Regulation 42
- Permits-to-Work covering live electrical commissioning
HSE temporary recruitment
Solar Farm Safety Officer Recruitment In 48 Hours
We place industry-specific specialists onto utility-scale solar builds with working-at-heights, MEWP, and adjacent-industry depth. Every officer we offer is project-ready in 48 hours, in writing, and the brief is held against your specific site, build phase, and statutory framework.
Solar is an expanding presence in our talent pool. We are honest about that: rather than fabricate solar-only case studies, we carry the crossover talent that already covers turbine lift planning on wind builds and HV substation commissioning on utilities rollouts into solar. The risk profile is recognisable, and our placements reflect that.
Officers are deployed globally through our HSE Temporary Recruitment service, with the option to step up to a managed service joint partnership or a full chartered consultancy wrap-around as the build phase changes.
Officer profile
- MEWP operator certification verified
- Working-at-heights and fall-arrest competency
- Wind turbine lift-planning crossover depth
- Utilities HV interconnection experience
- Project-ready in 48 hours, in writing
Where solar safety usually fails
Close The Gaps That Stall Utility-Scale Solar Builds
- Rapid-build schedules outpacing risk review. Module install fronts move faster than the documentation refresh cycle, and the next-day RAMS never catches up with site reality.
- Generic working-at-heights RAMS that do not reflect the PV mounting structure, fixing system, or fall arrest anchor density on your specific site.
- Sub-contractor competency gaps on Balance Of System install. Pile-driving and module crews mobilise quickly, and gate-stage competency verification gets skipped.
- No chartered duty-holder advice on PV interconnection statutory requirements at grid tie-in, leaving the principal contractor exposed at the live HV switching window.
- No project-specific Lift Plan for inverter and transformer substation set-down, with crane configurations re-used from unrelated jobs.
What An Industry-Specialist Solar Safety Engagement Looks Like
Related engagements
Where Solar Sits In Our Energy Stack
Solar shares lift planning DNA with wind, and HV interconnection DNA with utilities. The crossover sits under our Energy hub.
“Gavin has supplied competent EHS personnel… we want to go further, making all our plants safer.”
Solar buyer questions
Solar Farm Safety Questions, Answered
Do you supply safety officers for solar farm construction?
Yes. We supply industry-specific safety officers for utility-scale solar farm construction across Ireland, the UK, and continental Europe. Officers arrive with current working-at-heights and MEWP competency, plus adjacent-industry depth from our wind and utilities work. Each placement is project-ready in 48 hours, in writing, against your specific site conditions.
What is the difference between solar safety and other energy safety scopes?
Utility-scale solar carries a distinctive risk mix: rapid-build schedules across very large footprints, repetitive pile driving and module install at low working heights, inverter substation set-down lifts, and live high-voltage interconnection at grid tie-in. Wind work shares the lift planning and offshore-style logistics; utilities work shares the HV interconnection statutory framework. We bring both of these strengths into a solar engagement.
Are your officers MEWP and working-at-heights trained for solar BoS work?
Yes. Every officer we place onto balance of system installation work holds current MEWP operator and working-at-heights certification, with documented competency in fall arrest, harness inspection, and rescue planning. We verify certification at placement and re-verify on every renewal cycle. Our chartered advisor signs off the competency file before mobilisation.
Can you advise on PV inverter substation interconnection safety?
Yes. Our CMIOSH-chartered founder provides duty-holder advisory on PV interconnection statutory requirements, including substation commissioning safety, isolation procedures at grid tie-in, and live HV switching protocols. We author project-specific Lift Plans for inverter and transformer set-down, and we sit alongside the principal contractor through the commissioning sequence.
Do you cover both utility-scale and rooftop solar?
Our core focus is utility-scale solar farm construction and grid-tied PV plant builds, where the scope justifies a dedicated site safety officer and project-specific documentation. We also support large commercial rooftop PV programmes where the install crew, working-at-heights exposure, and Lift Plan complexity warrant the same engagement model.
CMIOSH · 48-hour mobilisation
Get A Solar Safety Officer On Your Project
We scope the brief on the first call and offer an industry-specific specialist in writing within 48 hours.
Discuss Your Solar Project